Worth: $34.95
(as of Nov 27, 2024 17:46:20 UTC – Particulars)
2 Audio system
Set up {Hardware}: (8 Stainless Metal Screws + 8 Stainless Metal Velocity Clips)
Mounting Template
Proprietor’s ManualFeatures:
Pair Rockville MS525W 5.25″ 400 Watt Waterproof Marine Boat Audio system 2-Means White
Peak Energy: 400 Watts per pair / 200 Watts every
RMS Energy: 200 Watts per pair / 100 Watts every
Injection Molded Polypropylene Cone
Aluminum voice coil with ASV winding
Material surrounds
Impedance: 4 Ohm
Frequency Response: 110Hz – 20 Khz
Sensitivity:87dB @1w/1m
Prime quality magnet: 6 OzY30 Ferrite magnet
1” inch ASV voice coil
IP56 waterproof
Absolutely Marinized Towards Salt & Recent Water Circumstances
Utterly Waterproof and rustproof at degree IP56
Anti-UV molded ABS plastic basket & grill
Pre-installed mounting screws included
Good for marine, outside, and automotive use
1” inch Tweeter: (PEI Diaphragm with NdFeB magnet)
Injection Molded Polypropylene Mud Cap
SPL: 87dB ± 2dB (at 1M / 1W)
Resonant Frequency (F0) 120Hz + or – 20% at 1V
3MM plate and three MM T-yoke
Whole Diameter: 5.79”
Cutout Diameter in Inches for Mounting: 5.31”
Whole Top: 2.56”
Mounting Depth in inches:1.85’’
Delivery weight: 2.42 Lbs
Delivery Dimensions:6” x 6” x 5.7”
T/S Parameters:
Magnet weight in OZ:6 OZ
Magnet particulars:Φ70*Φ32*10
Fs:142 Hz
Re:3.2 ohms
Qes:2.08
Qts:1.3
Qms:3.467
Vas:1.712L
Cms:195.49UM/N
Bl:2.967
MMS:6.4g
XMAX:1.5 mm
SD:78.54 cm2
Pair Rockville MS525W 5.25″ 400 Watt Waterproof Marine Boat Audio system 2-Means White.
Peak Energy: 400 Watts per pair / 200 Watts every. RMS Energy: 200 Watts per pair / 100 Watts every.
Injection Molded Polypropylene Cone. Aluminum voice coil with ASV winding. Material surrounds. Impedance: 4 Ohm.
Frequency Response: 110Hz – 20 Khz. Sensitivity:87dB @1w/1m. Prime quality magnet: 6 OzY30 Ferrite magnet. 1″ inch ASV voice coil.
IP56 waterproof. Absolutely Marinized Towards Salt & Recent Water Circumstances. Utterly Waterproof and rustproof at degree IP56.
Anti-UV molded ABS plastic basket & grill. Pre-installed mounting screws included. Good for marine, outside, and automotive use.
1″ inch Tweeter: (PEI Diaphragm with NdFeB magnet). Injection Molded Polypropylene Mud Cap.
SPL: 87dB ± 2dB (at 1M / 1W). Resonant Frequency (F0) 120Hz + or – 20% at 1V. 3MM plate and three MM T-yoke.
Whole Diameter: 5.79″. Cutout Diameter in Inches for Mounting: 5.31″. Whole Top: 2.56″.
Mounting Depth in inches:1.85″. Delivery weight: 2.42 Lbs. Delivery Dimensions:6″ x 6″ x 5.7″